The brands

The brands we deal with are wide
and international, and all items are
original European made with a full
manufacturing guarantee.

  • Engines :
    Perkins

    Deutz

    VOLVO Penta

    MITSUBSHI

    CAT

    lister petter
  • Alternators :
    STAMFORD

    LEROY SOMER

    MECCALTE

Techno motors-Nabatieh-Lebanon-Deir Zahrani-Main Road Tel/Fax:00961-7-531930

  • 1.jpg
  • 2
  • 3
  • 4
  • IMG_1367
  • IMG_1368
  • IMG_1369
  • IMG_1370
  • IMG_1373
  • IMG_1374
  • IMG_1375
  • IMG_1376
  • IMG_1377
  • IMG_1378
  • IMG_1379
  • IMG_1380
  • IMG_1381
  • IMG_1382
  • IMG_1383
  • IMG_1384
  • IMG_1385
  • IMG_1386
  • IMG_1387
  • IMG_1389
  • IMG_1390
  • IMG_1391
  • IMG_1392
  • IMG_1393
  • IMG_1394
  • IMG_1395
  • IMG_1397
  • IMG_1398
  • IMG_1399
  • IMG_1400
  • IMG_1401
  • IMG_1402
  • IMG_1403
  • IMG_1404
  • IMG_1405
  • IMG_1406
  • IMG_1407
  • IMG_1408
  • IMG_1409
  • IMG_1410
  • IMG_1411
  • IMG_1412
  • IMG_1413
  • IMG_1414
  • IMG_1415
  • IMG_1416
  • IMG_1417
  • IMG_1418
  • IMG_1419
  • IMG_1420
  • IMG_1421
  • IMG_1422
  • IMG_1423
  • IMG_1424
  • IMG_1426
  • IMG_1427
  • IMG_1428
  • Controllers :

  • DEEP SEA

    comAp

    Smartec

control panel

 

DESCRIPTION
The GENSTAR is an auto start generator controller that can control one generator. It includes a large LCD display, 5 control push buttons, 10 indicator LEDs. It displays all information needed to analyze the system. It monitors internal protections and external fault inputs. It can display all current and voltage measurements for the main power.
 GENERAL FEATURES & technical specifications
• 3 phases Galvanize isolated (3750V)
• AC measurement sampling rate = 200KHz
 • Complete instrumentation display for the generator
• Automatic or manual start possibility
 • Communication interface RS-232
• Plug-in terminal
• Complete documents for the installation & setup
• Temperature and oil pressure sender selected
• Large LCD display with backlight, functional at -30°C
• Operating temperature from -20°C to 70°C
• 5 programmable digital [contact] inputs
• 5 analog inputs for pressure, temperature, coolant, Dynamo and fuel level monitoring
• 5 programmable outputs
• Predefined sender models or manual configuration allowed
• Information on status, alarms and events
• Fast setup on site by the controller keypad or by using a Windows software
• Powerful software available for programming, Controlling and monitoring.
• Transistor short circuit protected outputs.
• Three phase current control range: 0 – 5A (CT input)
• Selectable protections alarm/shutdown
• RMS voltage and frequency measurement
• Individual Phase Information
• Generator voltage:75-300 V-AC (Ph-N)
• Generator frequency:10-100Hz
• DC supply range:6.0 to 33.0 V-DC.
• Standby current : ~ 80mA
• Charge excitation current: 54mA @ 12V-DC
• Analog input range: 0-5000 ohms
• Storage temp.: -30°C (-22°F) to 80°C (176°F)
• Maximum humidity: 95% non-condensing
• Dimensions: 5634 x 7400 (LW mils)
• Panel cut-out dimensions: 6004 x 8169 (LW mils)
• Starter dropouts: 0V for 100ms
• 200 errors log
• Battery voltage True RMS measuring alarm and shutdown.
• Engine hour counter.
• Oil hour counter flashing when oil hours expired.
• Over Current alarm.
• Over / Under Voltage alarm and shut down
• Over/ Under frequency alarm and shutdown.
• Oil Reset Password.
• Custom Features available.
• Selectable Engine Heater output and timer
• Dedicated General alarm output
• Main Password protection.

Our vision “to be one of the largest providers
of power system in the middle east by 2012”

  • “We believe in timely and quality deliver”